Simulator Collection for Atomic to Continuum Scales (SCACS)
Special Notice from Triad - Doe Contractor. Responses are due Feb 15, 2027 (88 days left).
- 88Days left to respond
- 67 daysThis buyer usually gives
- 10%Notices this buyer changes
- -Typical award from this office
What BidCamel found about this buyer
- This office usually gives bidders 67 days to respond; this notice gives 181 days.
- It changed 10% of its 84 notices after posting, so check for amendments before you submit.
- It has 0 open bids right now. See them all.
- We have no past awards from this office yet.
Key details
- Solicitation number
- S-196281
- NAICS code
- 541715 Guided Missiles and Space Vehicles, Their Propulsion
- Size standard for this code
- 1,000 employees
- Set-aside
- Open to all (no set-aside)
- Buying
- Service
- Place
- Los Alamos, NM · New Mexico bids
- Posted
- Aug 18, 2026
- Last changed
- Aug 18, 2026
- Contact
- Contact details are on the SAM.gov notice. Open on SAM.gov
Description
Engineers designing semiconductors, fusion reactors, spacecraft and advanced electronics need to know how heat and electricity will move through materials, at every microscopic location where a defect, grain boundary or interface could trigger failure. SCACS, developed by scientists at Los Alamos National Laboratory, delivers that insight by connecting two worlds that have long been disconnected: the atomic-scale physics that governs true material behavior and the continuum-scale engineering models used to design real devices. Built on novel atomic-site-projected conductivity methods and accelerated through graph neural networks, SCACS predicts spatially varying, direction-dependent thermal and electrical transport across large million-atom systems, giving material design Engineers a physics-grounded view of where hot-spots will form in materials, how defects will steer current and which microstructural choices will make or break performance. Overview The SCACS Toolkit is an AI-driven multiscale simulation platform designed to accelerate the development and deployment of advanced materials. Today, materials innovation is slowed by a fundamental gap: High-fidelity physics models (e.g., molecular dynamics) are too computationally expensive for real-world design, while the engineering-scale tools rely on simplified assumptions that limit predictive accuracy. This disconnect leads to costly trial-and-error development cycles and unexpected material failures in critical systems. SCACS bridges this gap by embedding machine-learned physics directly into engineering-scale simulations. Its core technology uses proprietary models Site-Projected Thermal Conductivity (SPTC-AI) and Site-Projected Electronic Conductivity (SPEC-AI) to translate first-principles insights into spatially resolved transport properties that can be used within standard finite element workflows. This approach enables accurate prediction of heat and electrical behavior in complex, heterogeneous materials at practical scales. The platform has broad commercial relevance across industries where thermal and electrical performance are critical, including semiconductors, energy systems, and advanced manufacturing. By reducing development time, improving reliability and lowering testing costs, SCACS offers a pathway to faster material qualification and more efficient product design, positioning it as a high-impact enabling technology for next-generation hardware innovation. Technology Description At its core, SCACS is a computational suite that links atomistic simulations to continuum finite-element models through two integrated modules: SPTC-AI for thermal transport and SPEC-AI for electronic transport. The Site-Projected Thermal Conductivity (SPTC) and Space-Projected Electronic Conductivity (SPEC) methods decompose a material’s bulk conductivity into per-atom contributions, revealing how individual phases, defects and interfaces locally steer the flow of heat or charge. A machine-learning graph neural network then learns these atomic-scale contributions from a curated training set and scales the predictions up to representative volume elements suitable for finite-element analysis. The companion solver modules called sptc2fem and spec2fem, built on FEniCSx, ingests the resulting thermal and electronic conductivity fields, respectively, and produces temperature/current maps, heat-flux/current density distributions and direction-resolved effective conductivities under realistic boundary conditions. This result preserves the atomic-scale anisotropy upstream that other methods would wash out. The end-to-end workflow delivers atomistic fidelity at device-relevant length scales. HPC runtimes drop from days to seconds, hot-spots and localized transport pathways become visible at the design stage, and engineers can interrogate how microstructural features will influence thermal and electrical performance before a single component is fabricated. By coarse-graining atom-resolved conductivity into spatially varying fields rather than collapsing them to a single bulk value, the technology preserves the heterogeneity, interfaces and defect populations that conventional finite-element treatments tend to hide behind an averaged scalar input. Advantages Reveals localized hot-spots and transport pathways that conventional continuum models routinely miss Cuts simulation runtimes from days on high-performance computing clusters down to minutes, without sacrificing atomic-scale fidelity Scales predictions from small atomistic cells up to million-atom microstructures previously out of reach for direct atomistic methods Captures anisotropy and spatial variation in both thermal and electrical conductivity, giving engineers a directionally accurate picture of material behavior Easily integrates with exiting finite-element solvers, such as Abaqus Market Applications Semiconductor advanced packaging (3D integrated circuits, chiplet thermal management, package reliability analysis) Fusion energy systems (divertor and first-wall plasma-facing components, refractory metal joining qualification) Aerospace and space systems (spacecraft thermal analysis, radiation-exposed materials, mission reliability modeling) Computer-aided engineering software (constitutive model inputs for industry-standard simulation platforms) Battery and energy storage (thermal management of cells, modules and packs) Thermoelectrics and biosensors (materials discovery, device-level transport characterization) Quantum device manufacturing (cryogenic cooling design, qubit thermal isolation) Related Software T5032 - SCACS is a physics-informed ML, graph neural network trained on atomic site-resolved SPTC data, enabling transfer of atomic-scale physics to device-scale modeling. TRL 4 LA-UR-26-25623 U.S. Patent pending LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your…
Similar open bids
1 day leftNov 20, 2026
Space Power and Reactor Capabilities (SPARC) - Presolicitation Synopsis
NASA Glenn Research Center
Presolicitation
3 days leftNov 23, 2026
Solid-State Energy Conversion from Heat to Electricity Request for Information (RFI)
Def Advanced Research Projects Agcy
Sources Sought
4 days leftNov 23, 2026
Request for Information: Multi-Source PNT UE
FA9453 Afrl Rjz
Presolicitation
4 days leftNov 23, 2026
Space Data Network (SDN) Industry Consortium for Space-to-Space Communications
FA8819 Sda and Combat Power Szk-la
Sources Sought
4 days leftNov 24, 2026
Request for Information (RFI) for a Cislunar Space System (CSS)
Dept of the Air Force
Special Notice
From SAM.gov and USAspending.gov public data. BidCamel adds the buyer and award facts.